clivegto Posted July 13, 2015 Posted July 13, 2015 Hi all, were all slingshot 750 sumps like this one in the pic which I belive to be a gsxr 750k. Cheers, Clive. Quote
canamant Posted July 13, 2015 Posted July 13, 2015 Think that is standard for twin pipe motors. The pipes go either side of the "barrel" Quote
Rene EFE Posted July 13, 2015 Posted July 13, 2015 As far as I know; no. Have 3 750's here, and they are all different. Quote
clivegto Posted July 13, 2015 Author Posted July 13, 2015 As far as I know; no. Have 3 750's here, and they are all different. Hi Rene, how are they different ?I know the b12 one is like a box to the left on sump and slabbys cooler in out were on the bottom of sump and sort of flat on bottom if I remember rightly. Quote
Rene EFE Posted July 13, 2015 Posted July 13, 2015 Different shape and oilcooler takeoffs. This is (I think) for differences in exhaustsetup. However, it you have the oilpickup to go with the sump, you can make 'em all fit, I do it all the time Quote
clivegto Posted July 13, 2015 Author Posted July 13, 2015 Why I ask is the hindel pipe I am planning on fitting to me NWS slabby was from a 750 slingshot.Motor is a 1052 so just a little taller but has same sump as in pic and 750 frame.Suppose it might depend on frame clearance for link pipe as well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.