Gsxr750m Posted October 21, 2016 Share Posted October 21, 2016 Put a b12 engine in my slingshot, using original wiring loom. On the b12 motor there are three wires from the neutral switch, blue, red and green . On loom there is only the blue, are the red and green needed anyone done this and can help, thanks Quote Link to comment
Captain Chaos Posted October 21, 2016 Share Posted October 21, 2016 just connect the blue one, that's the neutral light wire. The two others are for retarding the ignition in 1st and 2nd gear and are not needed. Or you could fit the Slingshot neutral switch on the B12 engine. It's a straight swap. 1 Quote Link to comment
Gsxr750m Posted October 21, 2016 Author Share Posted October 21, 2016 Ah thanks for the info mate wasn't sure myself, is a 750 m cdi unit ok for bandit motor? Quote Link to comment
caferacerdan Posted October 21, 2016 Share Posted October 21, 2016 I think the 750 cdi has a higher rev limiter so you will have to be cautious not to blow your motor taking it to the wrong redline Quote Link to comment
Gsxr750m Posted October 21, 2016 Author Share Posted October 21, 2016 Yes 750 does run higher just wondered if any other issues, and yes I will have to remember not to over rev it, cheers Quote Link to comment
Greeny13 Posted October 26, 2016 Share Posted October 26, 2016 I used a 750 cdi once...I wouldn't recommend it just get a bandit one,better safe n all that. 1 Quote Link to comment
Gsxr750m Posted October 26, 2016 Author Share Posted October 26, 2016 Yes think I'd be better off with a bandit one I'll only implode it if I use the 750 one, cheers Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.