Joebloggs Posted September 12, 2016 Share Posted September 12, 2016 Struggled with the front brackets but once I worked out what to do it wasn't too bad. Now time for a beer. Quote Link to comment
Joebloggs Posted September 12, 2016 Author Share Posted September 12, 2016 Big thanks to Peterrr and Hussey1 for the drawings and help re issues I'm likely to come across mounting the new motor. Quote Link to comment
Rene EFE Posted September 13, 2016 Share Posted September 13, 2016 750ES or Pop-up? Quote Link to comment
Joebloggs Posted September 13, 2016 Author Share Posted September 13, 2016 750 ES. Got everything separately off Eblag, only started collecting it two weeks ago, few bits and pieces need finding but I have most of the major parts. Going to see a local engineer to twin shock the rear (set of TEC shocks and the fabrication work still cheaper than a Hagon unit) Then it'll be off to the powder coaters and chuck it back together. Not going to be anything special although I suppose it'll be a good base to start from if and when I upgrade bits. Quote Link to comment
Poldark Posted September 17, 2016 Share Posted September 17, 2016 Did you have to remove any parts from the engine or did it just slip into the frame? Quote Link to comment
Joebloggs Posted September 17, 2016 Author Share Posted September 17, 2016 4 hours ago, Poldark said: Did you have to remove any parts from the engine or did it just slip into the frame? It went straight in, laid the engine on its side and dropped the frame over the top of it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.