Nick Posted July 19, 2016 Posted July 19, 2016 Have made a pair of lines up to bottom feed the replacement cooler i have mounted on my 1100M, but they don't seem to look 'right' for some reason? It has an akra system fitted and i have deliberately made sure the lines dont touch the headers to avoid heating the 'cooled' oil. Is there anything else to watch for? Have used a 45 deg and 90 deg on the sump fittings to retain oil filter access... Thanks Quote
WimBaas Posted July 21, 2016 Posted July 21, 2016 Mine are the same. Also aftermarket cooler with bottommount feeds and full Akra system. 1 Quote
Nick Posted July 26, 2016 Author Posted July 26, 2016 Thanks guys. 19 row cooler - i used a couple of 5mm thick o rings around each bolt between the cooler and plate to try and keep the vibes at bay. Bike is a standard 1127M with akra pipe, airbox and 40mm carbs - hopefully should be big enough. Quote
Nick Posted August 5, 2016 Author Posted August 5, 2016 Thanks for the help. So far, so good with the cooler and lines! Be interested to see if they run cooler with these compared to the curved oem ones... 1 Quote
WimBaas Posted August 9, 2016 Posted August 9, 2016 As I said before, I have the same setup only with stage 3 kit and duplex K&N filters. Runs fine and fast. No problems with cooling. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.