busa ash Posted June 26, 2016 Share Posted June 26, 2016 i am looking too fit an oil temp sensor in the side of my engine , does any one know the thread size of the bolt just under the barrels on the right side of the bike Quote Link to comment
Rene EFE Posted June 27, 2016 Share Posted June 27, 2016 I think some made did a kit including tempmeter on the oil-gallery itself, don't remember who it was though 1 Quote Link to comment
arnout Posted June 27, 2016 Share Posted June 27, 2016 Same size and pitch as the cylinder head oil plugs and the drain plug, M14x1.25 The oil plugs on either side of the filter cover are M14x1.5 btw.. Quote Link to comment
busa ash Posted June 29, 2016 Author Share Posted June 29, 2016 On 6/27/2016 at 10:09 PM, arnout said: Same size and pitch as the cylinder head oil plugs and the drain plug, M14x1.25 The oil plugs on either side of the filter cover are M14x1.5 btw.. thanks arnout ordered this its 1/8 npt thread might just dill a bolt and pot this in to try it Quote Link to comment
johnr Posted July 6, 2016 Share Posted July 6, 2016 dont some of the later 16v gsx750 motors have a temp sensor built into the oil filter cover? Quote Link to comment
arnout Posted July 7, 2016 Share Posted July 7, 2016 3 hours ago, johnr said: dont some of the later 16v gsx750 motors have a temp sensor built into the oil filter cover? That's an oil pressure switch, as the 750 comes sans the oval cover on top of the crankcase the 1100 has. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.