gs 750 engine temp

[busa ash]

i am looking too fit an oil temp sensor in the side of my engine ,

does any one know the thread size of the bolt just under the barrels on the right side of the bike 

[Rene EFE]

I think some made did a kit including tempmeter on the oil-gallery itself, don't remember who it was though

 

[arnout]

Same size and pitch as the cylinder head oil plugs and the drain plug, M14x1.25

The oil plugs on either side of the filter cover are M14x1.5 btw..

[busa ash]

On 6/27/2016 at 10:09 PM, arnout said:

Same size and pitch as the cylinder head oil plugs and the drain plug, M14x1.25

The oil plugs on either side of the filter cover are M14x1.5 btw..

thanks arnout  ordered this its 1/8 npt thread  might just dill a bolt and pot this in to try it 

[johnr]

dont some of the later 16v gsx750 motors have a temp sensor built into the oil filter cover?

[arnout]

3 hours ago, johnr said:

dont some of the later 16v gsx750 motors have a temp sensor built into the oil filter cover?

That's an oil pressure switch, as the 750 comes sans the oval cover on top of the crankcase the 1100 has.