Jump to content

lock up clutch


Captain Chaos

Recommended Posts

  • 1 month later...
Posted

thanks to @vizman for arranging the FBM lock-up for us.

Now @Saulius installed it. Removed the big nut holding the clutch

111_zpskux0btyv.jpg

then installed the lock-up center thing

222_zpscvmrqojx.jpg

but how does he tighten it? He has mounted the lock-up on it and tightened it by hand as much as possible, but we guess that's not enough. Should he make a special tool for tightening it?

One more pic of the lock-up in place:

333_zpscqxro9ts.jpg

Posted
On 4/14/2016 at 6:52 PM, Captain Chaos said:

Ok, thanks. We'll make one.

a 50mm socket works well with 8mm rods welded onto it.and a 20mm solid bar across the socket to prevent it from going in too deep, failing that upperton does them.or you can pay postage for the one upperton does and have mine.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...