BST38 Slide Guide O-ring

[Crass]

Does anyone have a source for the o-ring which fits at the base of the slide guide and seals it to the emulsion tube orifice in the carb body. None of the seal kits seem to include it. Or is it just a case of measuring the old one and sourcing a generic viton replacement?

[Upshotknothole]

Try this place. The parts diagrams usually don't have the carbs broken down that far to show that o-ring and you're right, I don't think most of the kits include it.

https://litetek.co/Carb_Kit_Suzuki_GSXR750_91_M.html

They also have a UK distributor you should be able to get them from.

[wobblegob]

Got mine from suzuki for my bandit 12 carbs

[Crass]

2 hours ago, Upshotknothole said:

Try this place. The parts diagrams usually don't have the carbs broken down that far to show that o-ring and you're right, I don't think most of the kits include it.

https://litetek.co/Carb_Kit_Suzuki_GSXR750_91_M.html

They also have a UK distributor you should be able to get them from.

Thanks, I'll check this out.

[Crass]

40 minutes ago, wobblegob said:

Got mine from suzuki for my bandit 12 carbs

I did look at the parts fiches but the Suzuki ones don't show these o-rings in the breakdown so there's no part number reference to go on. How did you order them - assuming the Bandit fiches also don't give that level of detail, or do they?

Edit - got the OEM part number from that Litetek link and yes they come up as available from Suzuki at a reasonable price. For future reference the part number is 13278-47090 . That seems to be the old part number superceded by 13278-47091.

 

Edited Wednesday at 10:31 PM by Crass
More info

[Upshotknothole]

I double checked and the parts sites I use don't have those o-rings listed for the carbs, so no part number to verify. Probably a Mikuni supplied part, same as the white plastic pieces, as Suzuki probably only included them in replacement carb bodies.

I found an o-ring part number on another site, but when I cross referenced it, it only showed a bunch of dirt bikes. It's probably some standard sized o-ring, but Suzuki didn't list them on the standard parts fiche.

[Jukka]

On 11/13/2024 at 9:51 PM, Upshotknothole said:

Try this place. The parts diagrams usually don't have the carbs broken down that far to show that o-ring and you're right, I don't think most of the kits include it.

https://litetek.co/Carb_Kit_Suzuki_GSXR750_91_M.html

They also have a UK distributor you should be able to get them from.

This was a good tip! been looking these as well and now they are on their way.. thanks