slimmer455 Posted August 16 Posted August 16 Hey everyone. I'm new here and just bought an 82 gs1100l. Bike runs pretty good,but a good carb cleaning will certainly help. Anyways,I have an oil leak ,appears to be coming from the engine side of the dust boot on the drive shaft housing. I think it a transmission seal. I have the part number but cannot find it. It also says this part is unavailable. Does anyone know where to get it? Or a number that's precedes it? Thanks for your insight. Quote
Poldark Posted August 16 Posted August 16 One of the great things about old Suzuki motorcycles is that many of the bearings and seals are standardized metric sizes. Try to find a four digit number on the seal. Match that number up on a bearing supplier's website. I've had good experience with: Bearings Direct Your High Quality Online Wholesale Bearing Store. I see you're in Maryland; I'm in Virginia so only a few hours away. Notice what I said in response to your other post. Introduce yourself (your interest in Suzuki motorcycles and what brought you to this forum). Quote
slimmer455 Posted August 16 Author Posted August 16 Thanks for the info. I'm going to a vintage Japanese motorcycle swap meets tomorrow. Apparently it the 34th annual. I've never been,so might be interesting. Quote
Poldark Posted August 19 Posted August 19 Anything good at the swap meet? There's a big annual winter swap meet in Pennsylvania (York, I believe). I've never been there, but I hear that it's good. Quote
bitzz Posted August 19 Posted August 19 If you hold the seal in your hand, there will be the size noted on the outside of the seal. Three numbers: inside diameter, outside diameter and thickness Any bearing house can get you that seal, it's a standard size Quote
Gixer1460 Posted August 19 Posted August 19 1 hour ago, bitzz said: If you hold the seal in your hand, there will be the size noted on the outside of the seal. Three numbers: inside diameter, outside diameter and thickness Any bearing house can get you that seal, it's a standard size But . . . . . if the shaft is worn, the new seal may also leak! Quote
TonyGee Posted August 19 Posted August 19 still available in Germany !!!!!! but if it still leaks then you can replace the drive flange. Ersatzteil für Suzuki 09283-35015-000 09283-35018-000 Wellendichtring 35x52x5mm | Eblag Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.