Clive's Moto Martin

[caferacerdan]

On 12/21/2024 at 12:50 PM, clivegto said:

So I stuck the bracket to the bottom of the pipe clamp with the little stick welder. Top part is also the back fuel tank rubber mount. These 2 new rubber mounts sit underneath that and will stop the plenum blowing off the carburettors under boost, bit of lidle gloss black . Of to the pub now on black eye Saturday     

Clever shit...so much so that I may have stole this idea for the slabby  Haven't checked if there is a patent pending though so I better be quick 

[clivegto]

8 hours ago, caferacerdan said:

Clever shit...so much so that I may have stole this idea for the slabby  Haven't checked if there is a patent pending though so I better be quick 

Sharing information is what this site has always been about and copying is one of the greatest compliments possible 

Edited January 30 by clivegto

[RUPE]

F**king hell ingenious!!!! Is that just a mock up and you’re going to knock one up in solid bit of billet with a bit more meat on the angle and with threads cut in…maybe even slotted holes on the calliper mounting holes ?…. Cool built btw 

[clivegto]

3 hours ago, RUPE said:

F**king hell ingenious!!!! Is that just a mock up and you’re going to knock one up in solid bit of billet with a bit more meat on the angle and with threads cut in…maybe even slotted holes on the calliper mounting holes ?…. Cool built btw 

Yes just a mock up but with a bit more work I don't see why it wouldn't be perfectly usable. 

[clivegto]

Got an r1 back caliper with hanger which won't be far off fitting hopefully. I'v removed the front end and taken it to Sam's too work his Yorkshire magic on creating some billet caliper adapters 

[clivegto]

Forgot pictures 

[clivegto]

As I thought the R1 caliper & hanger ain't far away from fitting with a spare wheel spacer popped into position   

[clivegto]

I whittled the R1 hanger down with my drill mill thing, still needs a proper top hat spacer but it fits.