Pegleg Posted May 18 Posted May 18 Fitting an MTC kit for a turbo on a Blandit. Can't seem to find a definite answer for ring gaps. Can anyone help who has experience with them maybe. Quote
Gixer1460 Posted May 18 Posted May 18 Google is your friend (sometimes) - and from the horses mouth! - https://www.mtceng.com/wp-content/uploads/2020/01/piston_kit_installation.pdf 1 Quote
Pegleg Posted May 18 Author Posted May 18 Thanks @Gixer1460. Read it again slowly Can you confirm I have my calculation right please. 3.2" bore x 0.0050" = 0.0016" top ring. 3.2" bore x 0.0055" = 0.0018" second ring. Maths not my strong point. No maximum gap mentioned. Quote
Arttu Posted May 18 Posted May 18 Those seem to be about 0.41mm and 0.46mm. Which sounds pretty much correct. I have been using 0.40/0.45mm for 80mm pistons. 1 Quote
Pegleg Posted May 18 Author Posted May 18 1 minute ago, Arttu said: Those seem to be about 0.41mm and 0.46mm. Which sounds pretty much correct. I have been using 0.40/0.45mm for 80mm pistons. Cool. Thanks @Arttu. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.