Jump to content

GS1100 intake spacing


Recommended Posts

Posted

I've been searching to no avail. I want to covert to efi but I am confused  what itbs to use.  Either some what bolt on or spacing adjustments. 

Thanks in advance, 

 

Newbie ScottO.o

Posted

I believe the early gsxr 600 k and 1250 bandit have been used on oil cooled bikes not sure about air cooled 

Posted

carbs are spaced 77-93-77  and they never had big carbs so intake rubbers may be a challenge getting throttle bodies in ...

GSASISTBODIES-Copy.thumb.jpg.8c61e8a01ff3e4cf2da1f8b0ec6bc577.jpg

5.thumb.jpg.9dcec86b918471d1d2cd106455ecb30e.jpg

This one used Kwawasiki Bodies mated with short hose to alloy manifold stubs B|

 

 

  • Like 1
Posted

Bandit 1250 throttle bodies go straight onto the air cooled head using the air cooled rubbers which you just rotate a touch to suit. :tu

This is a set on the ET engine in the Dresda. (I was pondering options at the time.)

20240207_095430.thumb.jpg.f73ba09e2484d06b85ff4cb0be1fe083.jpg

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...