speedo drive question

[TonyGee]

anyone know if their is a cable driven Suzuki speedo drive that'll take a 25mm spindle ?  

Edited December 13, 2023 by TonyGee

[clivegto]

Don't think there is but I might be wrong. 

[TonyGee]

1 hour ago, clivegto said:

Don't think there is but I might be wrong. 

yeah i think you are right clive,  might have to change the spindle to a 20mm one and bush the forks !!!!!!  

[fatblokeonbandit]

Hang fire tony, I bored a bandit 20mm one out a a while ago to fit a different wheel, I cant remember if it was 25mm but ill check ive still got it somewhere,

when i did the front end on my shiny bandit i bushed the fork bottoms as i wanted to use bandit wheels, it works fine

[TonyGee]

1 hour ago, fatblokeonbandit said:

Hang fire tony, I bored a bandit 20mm one out a a while ago to fit a different wheel, I cant remember if it was 25mm but ill check ive still got it somewhere,

when i did the front end on my shiny bandit i bushed the fork bottoms as i wanted to use bandit wheels, it works fine

cheers bud 

[fatblokeonbandit]

Here you go Tony, i cant remember what front wheel i was trying to fit ( aprillia mabey ) but i modified this bandit speedo drive to fit a 28 mm spindle?? and turned down the thickness as well, it works fine, so boring one to 25 mm should be  a doddle,.

 

 

 

Edited December 14, 2023 by fatblokeonbandit

[TonyGee]

I thought of boring mine out but theirs not a lot of meat left when its done   the spacer through the drive is 28mm O/D  so will only leave 1.5mm wall thickness when done !!!!