Braced ‘1985 F’ Slabby Swingarm

[Brians 7/12]

What do people use to brace a 750 Slabby swingarm… I think I remember someone using a R6 brace or something?… with a full Slabby fairing I’m guessing bottom brace would look best… but feel free to show me your braces… oo-er… & what/where you got them down please 

[R1guy]

Braced using Ali box section .

Best photo I’ve got.

[Brians 7/12]

Thanks… just any box section ali? 

[R1guy]

Not sure  on the gauge, I’d guess same thickness as the swinger.

[clivegto]

I bought an early r1 arm for 30 English quids cut the brace off welded it onto the lower side of the 7.5 slabby arm and had it powdered in chrome effect 

[Brians 7/12]

22 hours ago, clivegto said:

I bought an early r1 arm for 30 English quids cut the brace off welded it onto the lower side of the 7.5 slabby arm and had it powdered in chrome effect 

This is perfect… Thanks 

[clivegto]

1 hour ago, Brians 7/12 said:

This is perfect… Thanks 

Make sure you allow enough clearance for the chain so it doesn't eat through the brace 

[Brians 7/12]

17 hours ago, clivegto said:

Make sure you allow enough clearance for the chain so it doesn't eat through the brace