Busa clutch basket in B12

[TurboBobber]

Hi, as above really?

Has anyone got experience of why it won’t work? Pictures look identical on the back, the busa seems to use a different pump gear but it also looks like there’s a surface there as per the bandit. Both are apparently 72teeth. 

Not  too fussed about the inner hub at the moment* as I know there’s the funny slipper business but billet hubs are available without it. 
 

Purely concerned with the basket.  
 

cheers. 
 

[Duckndive]

Given the larger plate O/D of bus plates I would have thought the basket would be to big for the oil boiler cases 

I have a slider in a GSXR and that's tight 

Why not just fit a GSXR Steel Basket etc 

[TurboBobber]

11 hours ago, Duckndive said:

Given the larger plate O/D of bus plates I would have thought the basket would be to big for the oil boiler cases 

I have a slider in a GSXR and that's tight 

Why not just fit a GSXR Steel Basket etc 

Yeah I’ve since been told it’ll hit the rods apparently. Damn. 
 

What slider are you running?

[Duckndive]

7 minutes ago, TurboBobber said:

Yeah I’ve since been told it’ll hit the rods apparently. Damn. 
 

What slider are you running?

I have a Paul Wing Slider "he only made a few" ..and it has a ride back so no pit bike needed 

but uses stock plates unlike the MTC which uses a 1000 basket and plates 

I modified my lock up cover to take the ride back 

 

[TurboBobber]

15 minutes ago, Duckndive said:

I have a Paul Wing Slider "he only made a few" ..and it has a ride back so no pit bike needed 

but uses stock plates unlike the MTC which uses a 1000 basket and plates 

I modified my lock up cover to take the ride back 

 

Is that on a 1127 basket?  

[Duckndive]

21 minutes ago, TurboBobber said:

Is that on a 1127 basket?  

Yes 

[TurboBobber]

41 minutes ago, Duckndive said:

Yes 

Amazing!! 

I have some mutual friends with him. Will try get some more info. 

And if you have any more photos you’ll gain a friend for life 

[george 1100]

I tried an 2012 1000 basket and it just interfered with the rod. There earlier 1000 may fit as they have a slightly different shape on the outside of the basket but I don't want want to spend the money to find out it won't.  Shaft length was also an issue

[TurboBobber]

30 minutes ago, george 1100 said:

 Shaft length was also an issue

Story of my life. 
 

Okay cool. I should be able to borrow an earlier gsxr clutch for a test fit easy enough. I’m already running a k1 gsxr 750 (I think) hub, so that may prove to be a help or a hinderance lol. 
 

Cheers.