Loom Routing

[davecara]

We know they never fit back on right after theyve been taken off, so heres how they went on in Hamamatsu!

This is the J/K/L model, cant see other slingys being any different

 

Edited August 15, 2022 by davecara
Corrected by CC :)

[Captain Chaos]

3 hours ago, davecara said:

This is the M/N model

actually that's the J/K/L model.

M/N has the top fairing wiring completely different. Plugs coming out under the left frame rail and going along the left air tube to the headlights and handlebar switches IIRC.

[davecara]

6 minutes ago, Captain Chaos said:

actually that's the J/K/L model.

M/N has the top fairing wiring completely different. Plugs coming out under the left frame rail and going along the left air tube to the headlights and handlebar switches IIRC.

Got any diagrams CC? I need to route my spaghetti harness this evening. 

I trhink its actually a 750L loom ive got but its getting chopped about a bit for my speedo to with right so its of little consequence 

[Captain Chaos]

2 hours ago, davecara said:

Got any diagrams CC?

This is all i have, pics taken from a Clymer manual. 

Maybe @Upshotknotholecan help you out?

Anyway if you have a 750L loom, your diagram in the first post is fine. 

[Upshotknothole]

Just saw this. If you need photos, I need to pull my tank tomorrow and I can get you what you need. I also have the factory manual that I can check for cable routing. Also late gen slingshot harnesses are the same for the 750 and 1100.