slabsideB12Kent Posted April 19, 2022 Posted April 19, 2022 I'm looking for a slip on end can with an inside diameter of 63mm that's either road legal or under 102Db. I've been recommissioning my bike for a while now and discovered that my old MOT end can is unlikely to pass any longer as all the seals are hanging out. Rebuilding would be an option but it's been down the road. I've searched the internet and cant seem to find end can rebuild kits or 63mm internal diameter end cans. I want to put the bike on the road and take it round brands hatch this year so need a non race can option (I have a damaged race can). Any ideas? Quote
Simbec1863 Posted April 19, 2022 Posted April 19, 2022 (edited) What bike is it for? You can buy end can repack kits on eblag,Fuel and Delkevic make them and probably a few others to. A16 Road and race in Lincoln will probably have an end can that will fit,I’ve run them on 2 race bikes and they pass noise testing no problem with or without the baffle fitted. They will mod existing cans that they sell if you need any adjustments to, they’ve done it for me when my link pipe wasn’t quite the right size and a tight enough fit. Edited April 19, 2022 by Simbec1863 Quote
R1guy Posted April 19, 2022 Posted April 19, 2022 1 hour ago, slabsideB12Kent said: I'm looking for a slip on end can with an inside diameter of 63mm that's either road legal or under 102Db. I've been recommissioning my bike for a while now and discovered that my old MOT end can is unlikely to pass any longer as all the seals are hanging out. Rebuilding would be an option but it's been down the road. I've searched the internet and cant seem to find end can rebuild kits or 63mm internal diameter end cans. I want to put the bike on the road and take it round brands hatch this year so need a non race can option (I have a damaged race can). Any ideas? Sp engineering did the one for my Kat. Not the most exciting can but got through noise testing @ Brands and not expensive. 1 Quote
slabsideB12Kent Posted May 23, 2022 Author Posted May 23, 2022 So using the Micron spring fitted exhaust downpipes I had on the bike before but with a can marked road legal I failed a noise test using a Db meter borrowed from work. Probably my fault as I removed the baffle from the end of it years ago. Looks like I'm going to have to fit another system I have that uses bolts at the manifold and has the baffle in place with the road legal end can. Quote
slabsideB12Kent Posted June 5, 2022 Author Posted June 5, 2022 (edited) I fitted the narrower bore downpipe system which includes a baffle in the outlet along with a rebuilt road legal end can and the system measure less than 102Db. Very happy Edited June 9, 2022 by slabsideB12Kent I quote 120 Db - should have been 102Db 1 Quote
stockcar Posted June 5, 2022 Posted June 5, 2022 Most trackdays we have done over the years were circa 105dB MAX.........120 is mental loud?? 4 Quote
slabsideB12Kent Posted June 9, 2022 Author Posted June 9, 2022 Sorry I meant to say 102Db - I've adjusted my last post. Quote
stockcar Posted June 9, 2022 Posted June 9, 2022 I did think afterwards that 120 was just a little mental, even for here........ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.