CockneyRick Posted March 28, 2022 Posted March 28, 2022 (edited) Does the front stay on the fairing mount go above or below the lower lip of the top nose fairing? Aftermarket one so no holes or guides! Edited March 28, 2022 by CockneyRick Quote
Simbec1863 Posted March 28, 2022 Posted March 28, 2022 (edited) The main part the headlights fit to? If so they should have captive nuts on the stay and go inside the fairing if not this then any pictures to show the issue? Edited March 28, 2022 by Simbec1863 Quote
CockneyRick Posted March 28, 2022 Author Posted March 28, 2022 (edited) The bottom stay that has holes in & sticks forward. In the pic the fairing is under it. Edited March 28, 2022 by CockneyRick Quote
Simbec1863 Posted March 28, 2022 Posted March 28, 2022 (edited) On my H model it’s how your picture shows assume that is an F model frame as mine has 2 bolts is the captive nut at the lowest point? Edited March 28, 2022 by Simbec1863 Quote
CockneyRick Posted March 28, 2022 Author Posted March 28, 2022 Captive nut is underneath. I had the fairing fitted like this but took it off doing some work. Just tried to refit & the fairing seems to fit easier above the stay. Problem with that is, none of the mid fairing holes to engine rubber mounts line up anymore, so may have no choice but to put the fairing below! Quote
Captain Chaos Posted March 28, 2022 Posted March 28, 2022 AFAIK the fairing frame/mounts should always be inside the fairing. Never seen it otherwise. So as in your first pic is correct. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.