Swiss Toni Posted November 9, 2015 Posted November 9, 2015 These are from B12 (Mk 1 or 2) ? The arm, when I can remember where it is, will be going on the ET. What I want to know is, as you'll see in the 'photo's, both are different. Which goes where, ie; disc side, sprkt. side? Quote
Captain Chaos Posted November 9, 2015 Posted November 9, 2015 if you have the spindle, you will find out it only fits one way. I think the one on the left in your pics is where the nut goes. And the nut is at the sprocket side from the factory. Quote
Swiss Toni Posted November 9, 2015 Author Posted November 9, 2015 Now why didn't I think of that! The top lip is to stop the wheel spindle from turning. Cheers, Cap'n! Quote
bluedog59 Posted November 9, 2015 Posted November 9, 2015 Block on the right in your pictures is for the flanged spindle end to lock into while you do the nut up on the other end. The chamfered lip goes towards the rear of the swingarm and the square edged lip on both is where the chain adjuster bolts push on. I find putting the spindle so the nut end is on the brake side best as it's easier to get at if the bike is on the side stand. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.