Steveg1100 Posted September 7, 2020 Posted September 7, 2020 Is there an easy way to replace the throttle cable on a GSX1100F Powerscreen model? I can even see the end of the cable that attaches to the carbs!!!!! Quote
Askamaskinservice Posted September 7, 2020 Posted September 7, 2020 Leave it to a mechanic. Sorry couldn't help myself. What do the workshop manual tell you to do, that is the way to do it. Download it if you don't have it, it's a must. 1 Quote
Swiss Toni Posted September 7, 2020 Posted September 7, 2020 (edited) I think the best bet, if you come across a cable that’s a pig to replace, is to take the carbs off, replace the cable, (at the carb end), then the carbs. Then feed the cable back to the throttle. If you use a ‘messenger’, it’s easier. Edited September 7, 2020 by Swiss Toni 1 Quote
wraith Posted September 7, 2020 Posted September 7, 2020 Always had to remove the carbs on oil cooled motors. Quote
Steveg1100 Posted September 8, 2020 Author Posted September 8, 2020 You know, I knew it was going to be a carb off job I was just hoping someone had an easier way. Happy Days 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.