Jump to content

Slingy or WP modern Swinging arm options ?


Recommended Posts

  • 2 weeks later...
5 hours ago, Pheasantplucker said:

Well, it was bloody cold out in the shed last night so I waited till this morning, not much better!

32mm between the split mounting and the outside width is 62mm,

the solid mounting on the other side is 60mm wide.

Hope this confirms wether you can use one of these brackets or not, good luck.

81E6492F-1ECA-4521-9F4E-081CB34D8F9A.jpeg

Thanks pal, much appreciated, I'll get in the shed when the rain stops and measure up.

Link to post
On 12/13/2020 at 11:40 AM, Pheasantplucker said:

Well, it was bloody cold out in the shed last night so I waited till this morning, not much better!

32mm between the split mounting and the outside width is 62mm,

the solid mounting on the other side is 60mm wide.

Hope this confirms wether you can use one of these brackets or not, good luck.

81E6492F-1ECA-4521-9F4E-081CB34D8F9A.jpeg Can you please measure the distance between the two mounting holes on the flat plate please and the distance from these to the  round pivot mounts roughly please?

 

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...