Grumpyone Posted January 5, 2020 Posted January 5, 2020 Hi I have just acquired a 1992 1100f power screen. Turns over fires, occasionally back fires sometimes starts but not tick over. Sounds as if running on 3. Not done anything with it but will replace plugs air filter and eventually oil and oil filter if I can get it to run. Any known faults. I suspect fuel, carbs, coil, leads etc Where should I look first Thanks in advance Graham Quote
BigT Posted January 5, 2020 Posted January 5, 2020 Valves, carbs,electrcial are the first thing Otherwise, you're just pissing in the wind Quote
wraith Posted January 5, 2020 Posted January 5, 2020 Welcome to OSS. You might get better info on the power screen 1127 oil cooled bike in the oil cooled section How long has it been from it last was started? I'd start with new fuel and check you have a spark on all 4 plugs, if its been stud for any time a carb clean maybe in order. Quote
banoffee Posted January 5, 2020 Posted January 5, 2020 27 minutes ago, wraith said: You might get better info on the power screen 1127 oil cooled bike in the oil cooled section Moved 1 Quote
Ben Slabby Posted January 5, 2020 Posted January 5, 2020 (edited) If it's been stood, suspect pilot circuit. Getting good fuel flow through the tap? Pull the plugs and check they're clean, gapped correctly and a good spark. Battery fully charged? IMHO you're looking at cleaning the carbs though. Edited January 5, 2020 by Ben Slabby Quote
Grumpyone Posted January 10, 2020 Author Posted January 10, 2020 Thanks for the suggestions Any pitfalls in stripping the carburettor Should I assume I can reuse gaskets Quote
wraith Posted January 10, 2020 Posted January 10, 2020 2 hours ago, Grumpyone said: Thanks for the suggestions Any pitfalls in stripping the carburettor Should I assume I can reuse gaskets The gaskets are rubber, so yes can be reused. Quote
Gixer1460 Posted January 11, 2020 Posted January 11, 2020 13 hours ago, wraith said: The gaskets are rubber, so yes can be reused. Provided you don't - nick em, rip em, or lose them! They can go hard and do split / break on disassembly and are also prone to being flattened due to age and so leak on reassembly. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.