Kraptanaman Posted April 20, 2019 Share Posted April 20, 2019 I fitted a new Clutch to my 1100 but the lever needs to be near enough fully out when it is engaging. So embarrassing take offs . Can this be adjusted? Quote Link to comment
Gixer1460 Posted April 20, 2019 Share Posted April 20, 2019 1 hour ago, Kraptanaman said: I fitted a new Clutch to my 1100 but the lever needs to be near enough fully out when it is engaging. So embarrassing take offs . Can this be adjusted? No adjustment as such - being hydraulic it is supposed to be fairly well self adjusting - which means its either assembled wrong, its a plate short in the stack, there is air in the system or multitude of other things! Quote Link to comment
wraith Posted April 20, 2019 Share Posted April 20, 2019 You could put a small washer (m4) or two between the push rod and slave, in the hole that the push rod sits Quote Link to comment
Kraptanaman Posted April 21, 2019 Author Share Posted April 21, 2019 Sorted. Thanks for the advice. It was air in the system. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.