nickyboy.4 Posted February 17, 2019 Posted February 17, 2019 So having been warned off fitting chinese pods to my newly aquired project i got myself a set of hardly used s&b's, in a perfect world i'd stick with the standard airbox but brittle rubbers etc means it makes sense for me to go with pods and while i'm getting other bits sorted i may as well sort the jetting out now. Where do i start with the jetting, i believe the motor is a 1135cc, i'm fitting a Jama 4 into 1 so a starting point would be a great help, will a Ledar kit off Eblag help and what does one of those kits actually include? Quote
Toecutter Posted February 17, 2019 Posted February 17, 2019 Your probably looking around the 130-135# mikuni main jet size. Get the main jet correct and then fine tune backwards to iron out any niggles and ensure a smooth cruise etc. Will take a bit of faffing to get it close. Finish up with a decent dyno operator to get her bang on. Do check though, before you start with the carbs that you have good strong spark. Ignition timing and everything functioning correctly as this will effect your tuning. I have found good results with just main jet and needle tweakage without using kits in the past just takes a bit of time. Quote
Dezza Posted February 18, 2019 Posted February 18, 2019 Buy a Ledar induction kit from Grumpys. Sorted Quote
nickyboy.4 Posted February 18, 2019 Author Posted February 18, 2019 yes i remember sending him a email regarding using crap filters and he put me right straight away i'll have to order an induction kit-ta Quote
Ibbo Posted February 23, 2019 Posted February 23, 2019 I just fitted a ledar kit, (from grumpy) and 135 mains to my 1100 with k&n ovals and harris type pipe. Runs quite sweet now. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.