-
Posts
476 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by et1170
-
-
56 minutes ago, buff said:
Same as the old chris richards colours ?
Yes mate, Carl liked em. Goes well with my Kat.
-
-
Rs 36,s fitted, chain on and measured the chain adjuster marks on the swinger and they are spot on after my basic jigging up of the 2 bandit arms and Jon's tidy welding. Breather tank fitted properly . Front cowl and headlight fitted but brackets a bit flimsy so looking at beefing that up tomorrow. Beer oclock.
-
6
-
-
-
-
Swingarm top hats are back now so there should be a big move forward on the build this weekend. Should have been racing but plenty to do on this project. better start looking at rwyb dates at the pod, Carl might be out on this soon!
-
-
1 hour ago, Gixer1460 said:
Have you got the airline in the right place? Can't see where the clevis mounts but the ram looks fairly well near full extension so won't have much force behind it.
I used to try and get the ram about 1/2 way through its total travel or a little less when fitted to the gear shift shaft, just enough to allow unpowered downshifts without binding or bottoming out.
The gear end is not connected to the spline yet, It will be similar to how you described.
-
-
-
1 hour ago, wraith said:
Think this is going to be the quickest build I've ever seen
Sorry, playing catch up. A bit slow to start the build thread !
-
1
-
-
-
13 minutes ago, Swiss Toni said:
I think RS’s are prone to that! Two of mine snapped off when I stripped them. They only need a little tweak to tighten. Got them out ok though.
this was gone as I touched it, allens to the rescue
-
-
-
-
-
-
-
-
-
On 3/5/2021 at 11:48 AM, Tinsnips said:
Nice project! Sub’d this right away. Are you going to brace the swing arm?
No mate , sleeved on the inside quite substantially so should take it!
-
1
-
-
-
Et from barn to the Pod, a quest for 9 seconds
in OSS Racers
Posted
V & H fitted.