-
Posts
219 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by ziggy
-
Anyone need a lift to the show? Im taking one of our 18 tonners so can help on Leeds - Manchester route. Plenty of space, ratchets and blankets if needed and tail lift for ease. Thinking of going Fri aft but may go Sat early morning if needed.
-
Checked vent hose from the top of cam cover and all good. It's just that (ram?) air tube not attached to anything so thought someone at some point bodged it and left it as it. Tank is bolted ok so must be the handle then. Cheers
-
Can somebody shed some light on the below - at first I thought somebody bodged air tube (as its not connected to anything) but checked alphasports and looks like it should be. Then theres the fuel tap - cant turn it as it fouls the frame - does this look like correct tap? Tank looks like 11 as it has fuel gauge so just wondering if the tap is 750 or off something else
-
According to @Kristjan 11s are longer
-
Forgot to mention - mines standard too, not sure how good is that
-
I can bring my slingshot as Im going anyway
-
@Kristjan, do they go inside oem fairing ok? Also, are they ok with oem cooler? Read somewhere they foul cooler, not sure how true is that though
-
Nice one cheers Btw, got some more pics of that bike DnD?
-
Heard these go on with a bit of persuasion. Anyone tried it? Cheers
-
Gsxr 750 & 1100 frames
ziggy replied to ziggy's topic in Water Cooled, V-Twins, Singles and 2-strokes
Great stuff, cheers -
Gsxr 750 & 1100 frames
ziggy replied to ziggy's topic in Water Cooled, V-Twins, Singles and 2-strokes
Perfecto, thanks a lot mate Will probably be back with more question once purchase is done -
Gsxr 750 & 1100 frames
ziggy replied to ziggy's topic in Water Cooled, V-Twins, Singles and 2-strokes
Thank you Captain Spent some time on the interwebz and every page says different things hence the question. But generally looks like 11 is longer and taller. -
Anyone know if there different? Would 750 take 1100 front and rear end? Cheers
-
Very nicely done Mr. Slim
-
GSXR 750 WR HELP!
ziggy replied to skunkrider2's topic in Water Cooled, V-Twins, Singles and 2-strokes
Have you tried hammering torx bit in? -
Fortunately its used so should be here withing next few days
-
Nice one Slim will look really good on the bike
-
Thanks for all help guys Its on hold for now as Im waiting for jmc swinger to arrive so all that will need redesigning anyway
-
Hope that helps http://gsx-r.tatsuwo.org/e/historyofsacs.html
-
It fits in bandit arm but not slingshot - bandit caliper hanger is too wide and shlinshot is not wide enough. But then again, pretty sure that was bandit 12 wheel too with same spacers
-
Looking good Carl love that bike
-
Wheel, even though its as far left as poss, is still offset to the right so either the swinger is offset in the first place or something is not right here Used bandit spacers and bandit caliper hanger is too wide and slingshot too small.
-
Think that might be the case Cobby - had a better look and looks like the swinger is off set to the right. Doesnt look like its been machined down so would assume the frame has been modded (never seen standard efe frame so cant tell), the spindle bosses have been taken out to 20mm to accept spindle. Here are some pics
-
So if both wheels are the same (5.5") do I need slingshot spacers then?