Brians 7/12

Cheers mate !! :-]

Cool... Thanks... hopefully they are Mikuni... which I believe would be equivalent to DJ 130’s... which I’ve heard are what people get with good results... fingers crossed... ran fine with this jetting before I decided to strip & clean as float 1 kept leaking until the float bowl emptied out when switched off !! :-o

So getting the Flatsides stripped & cleaned at Bentleys... chap has said the carbs have MJ122.5, 20 PJ, Needle Jet P5 & Jet Needles 6DP3... but someone has slapped a Dynojet sticker on the bike... has this got a DJ kit?... or are these standard?... it’s running full Laser Exhaust & K&N Cones !? any ideas of fitting jets jets to get it in the main ball park?... remembering reading waaaaaay back that you can use Mikuni Jets to get just a good result... or should I just go with a Factory Pro Kit !? Tried searching but seems to be B12 jetting & all sorts popping up !!

28.5” !! :-)

I’ll check later !! :-)

Thanks Guys... they’re for Buell XB12 Forks... 54/56mm... looks like it’s a stem press then !! :-(

Cool... I remember this chart now... but for older stuff... need to find this... lol !! :-D

I believe GSXR 1100M/N... hoping for straight fit onto 750 Slabby Frame... will the Watercooled 11’s work as well?... trying to do something similar to UK Lees R1 fork swap... using the GSXR Triples for easy fitting all being the same distance apart etc (not using R1 Fork’s... but hoping regardless... lol) !! :-)

eek... lol... better check mine... Thanks Clive !! :-)

So mine is a bit of 6” hose & a small cone filter... guessing I should really change this?... my old one had a 3ft long hose pipe directed down towards the front sprocket cover with an open end to dribble on to the chain !? :-o

Does that outlet part just pop out?... haven’t really looked at mine... was surprised it came apart... lol... don’t want it popping off accidentally when taking the tank on & off !! :-/

lol !! :-D

True... just weird to me... thought it might be some little trick I could use that might give a better spark or something... lol !! :-)

Hi Rick... pic2... the top black braided/sheathed wire seems to be connected from one coil screw to the other coil screw... rather than to each independent coil wires... like in pic1 where he has 2 orange... 1 white ... 1 blk/whi... going into the loom... this is how mine is as well... pic2 seems to ‘bridge’ one wire across !? :-/

Cryptic Eh?... my eyes may be deceiving me... plus I’m no expert at wiring... but these 2 different pics stolen of Google... they may belong to people... or same person on here... confuses me... well... maybe just my eyesight !! 8-/ 1st pic shows a Blk/Whi wire connected between the 2 Coils on the extended bars... why !? :-/ 2nd pic also shows the same but black braided that seems to connect from the screws !? :-/ Hope you follow what I mean... lol !? :-p