94RF1146
-
Posts
66 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by 94RF1146
-
-
Hi , it's been a while....
I decided to simplify my setup and save some weight.
I didn't like the look of the plenum and my subframe.
got myself a Miller welding machine and having fun with it.
Made a new plenum and started on the subframe.
I want my bike running by the end of the month.
-
4
-
-
Crank & rods..
Case clearances...
1700 cc Injectors...
400 l/hr Fuel pump...
Talked with APE yesterday about my pistons order, apparently JE lead time is 8 weeks and CP up to 16 weeks !
Cheers,
MM
-
3
-
-
Here's the link from where I got my exhaust collector.
Cheers,
MM
-
Good luck with the project. Hope you don't get too many issues.
Cheers,
MM
-
1
-
-
That's the plan. Turbo, fuel system and other components carefully selected...
I'll share the dyno sheet after tuning and videos / timeslips going down the track next season.
Don't underestimate those 1100 wc motors.
MM
-
1
-
-
Hi everyone,
The girlfriend was bogging me for a backrest when we were going on rides on my M109R...
One day, I told her:" to go look in the garage, I found your backrest, it came with the rest of the bike" !
Found a 1988 Intruder 750 with only 1631 kms on it. Got Collector plate.
I put her thru motorcycle school and now the bike has almost 9000 kms on it.
Here a pic from one of our BC Frasier Canyon & Sunshine Coast tour.
Anybody else has / had an intruder?
-
I'm feeding it from both ends and return from the middle.
-
I'm also planning on building another plenum with less angles in it.
-
3
-
-
6 hours ago, NorthernBloke said:
Very interesting project,
what - 1290cc motor are you using, Oil cooled, Water boiler or Busa?
79.5mm bore x 65mm stroke = 1290 cc 1994 GSXR-1100 WC.
-
Hi ,
Do you guys use Suzuki Idle Control Valve ?
Cheers.
-
More pics...
-
6
-
-
Hi guys, I know it's been a while...
About 3/4 done with my build. awaiting pistons & rings then I'll start the harness.
The build:
- 94 RF frame (1/2)
- 1290cc motor
- 30/27 valves + HD spring set @ 85 lbs
- Webcam .383 / .342
- Gen 1 Busa 46mm TB
- Custom fuel rail / -8 fuel line
- 400 l/hr fuel pump
- 1700cc injectors
- Garrett GTX3576R Gen 2 turbo on Ethanol
- MaxxEcu Sport
- 68-70" wheelbase
- Custom sub-frame
- Air to water intercooler running iced water
- Gen 2 Busa 3/4 bodywork for rider position / aerodynamics ( my RF bodywork was cracked and the riding position didn't permit me to hide behind the screen)
It's crazy the amount of fabrication on a turbo bike. i like the challenge / engineering part of it. Should be ready by spring. I got help from friends.
-
6
-
1994 Turbo RF build
in Forced Induction
Posted
Preliminary design...