-
Posts
139 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by flatline
-
I can’t help it - a bit/seriously OCD sometimes... which can be a hinderance... it’s all in the detail..
-
-
Watching ‘Formula 1’ on Netflix this afternoon, whilst getting the swing-arm & front-end back in... got the throttle cables hooked-up, so I can now can now (almost) sit on the ‘bike & make ‘Race-Fit’ noises!!
-
Watching ‘Formula 1’ on Netflix this afternoon, whilst getting the swing-arm & front-end back in... got the throttle cables hooked-up, so I can now can now (almost) sit on the ‘bike & make ‘Race-Fit’ noises!!
-
The cam-timing articles (x2) appeared in the June & July 2007 issues
-
A massive thank-you to Spike Livingstone @ www.raggededgeracing.com for giving me a hand to move the Harris (GSX-R 1127) motor from the dining-room table & on to the 'Homebase' chassis-stand, I ain't getting any younger!!
- 176 replies
-
- 15
-
- 176 replies
-
- 13
-
- 176 replies
-
- 14
-
-
-
A bit of work today... the 'head was originally worked on by Roger Upperton using the standard 36mm carb' rubbers.. I have had to use 40mm carb' rubbers to fit the new carburettors... so some work with the Dremel to match rubbers to port & vice-versa....
-
Yoshi engine covers painted today - me mate Spike at www.raggededgeracing.com did the deed, as my shaky hands don’t have the precision anymore...
-
Well I'm going to need a new carpet once it's finished, that's for sure!!
-
The photo’s don’t do it justice.... still a few scars from being ridden on the road tho, so not a 100% perfect show-bike, bottom line is it’s 30+ years old... but I’m happy with that cos’ it means I can ride the thing & not worry...
-
The guy who did the polishing recommended Autoglym Super Resin Wax...
-
-
Feels like I’m making progress... starting to button-up the engine.... suddenly there are fewer bits & pieces on the dining room table, and more tools back in the tool box.... hope to get the frame & swing-arm back from being polished in the coming week
-
Interesting... I followed the destructions in the ‘Streetfighters’ articles for cam-timing.... which are spot-on... Just to say that the Yoshimura paperwork cam-timing figures are for timing their cam’s with the tappet clearances set at 0.15mm, which differs from on-line advice.... Spent hours working with zero tappet-clearance trying to get the cam timing right ... then set the clearances to 0.15mm & the timing/lobe-centre figures were spot-on...
-
I believe that Terry Rymer ordered one, maybe that’s his in the Harris catalogue??
-
The oldest known photo of my F1 is this... which is how it looked when I got it. The registration document lists it as being white, which I'm guessing was its original colour when first registered(?)
-
Yeah, fascinating talking to Mark... he explained that the ‘bike the shock was originally designed for (and is evidenced in the paperwork that I got with the Harris) was probably heavier than the Harris.... at some point a lighter spring was fitted, but not an Öhlins item - so didn’t actually fit properly. Mark sourced an Öhlins spring that matched the lighter rate of the non-standard replacement... Fascinating taking on on project & unraveling how/what/why it was built the way it was...
-
'Before' & 'After'.... The rear shock has been to Mark at https://www.mhracing.com Öhlins service centre.....
-
-
What fun... getting set-up ready for my first attempt at camshaft timing.... what could possibly go wrong??!!
-
- 176 replies
-
- 11