ZenViking

Is it a complete front end? Not sure about your front fork and wheel or the eventual Geometry, but have a look at this excel with the headbearing size for changeability: https://oldskoolsuzuki.info/archives/744. Your bandit wheel should fit, I'm in the prosess of fitting a 600 Bandit to my own bike. Just waiting for some spacers, but you will need to machine down the sprocket carrier so the rear sprocket doesn't hit the inside of the swinger and an offset front sprocket.

I am fitting a Bandit rear wheel in my stock EFE swinger and looks like it will fit with new spacers and machining of the sprocket carrier. it's 4,5" and that will get me 160 rear tyre. For Front i did a direct swap with a GSXR1100 W

This system is supposedly a performance aftermarket exhaust for a GSXR 1100 91", so i'm thinking it should fit from what i have gathered from my reading of different postes in here. Not sure about the diameter of the downpipes, but that difference in size can be remedied with some gaskets right?

In a perfect world I'd get my 4-2 and be a happy bearded man, but haven't managed find anything remotely close. I'm also not that a savy mechanic so I'm learning on the job and taking everything i read in here as gospel. This system is a "FUTURE" complete system. I was hoping to use a cheaper secondhand zorst, seening that anything that i buy on eblag or anywhere else on the interwebs gets expensive quick fast and in a hurry as it goes through the Norwegian toll and taxation. Thanks for the Options of BOS,MAB and Akrapovic.

I´ve stumbled over these GSXR1100 91 aftermarket Zorsts, i was wondering if they might fit my EFE?

Looking nice and shiny...

Hey Marc Welcome to OSS Good looking bike you got there

Just gone through all the connections on my EFE clocks recently and this is what i found. And if my memory serves me right the white wire was spliced in to the black and white wire circuit. but the two others are 50/50 guesswork, but my educated guess is that Orange is positive feed.

I think White is Ground, Orange positive feed, and Brown from the ciols timing feed, but not sure.

I Have an OEM Reg/Rec laying around that I don’t need.

Thanks, and that is a sweet looking bike

I'm getting to the point where I can see that I might be able to fire up my EFE 1100 in the foreseeable future and will be needing some new headers. So i'm wondering which headers that will be compatible with my 86 EFE. Are there any of the GSXRs or other bikes from that era that will fit? with minimal tinkering preferably. I would love a Plug'n/bolt'n play 4-2 header system that i can slipp on some short mufflers.

Okay, so if anything they aren't integral to get the speed sensor to work? But maybe i can use it with my M-units speed sensor input...? when i start wiring the thing. Thanks guys

Thanks Captain Chaos then i wont be needing those it seems

I have identified 14 of the 16 connectors and they are not the Indicator indicators (it's a word now Askamaskinservice) The bike is a 86.mod originally EF from Sweden imported to Norway in 88 Dezza, but i don't know if it is from the UK, US or the Euro market. I have had a look at 2 or 3 different wiring diagrams that are on the internetts and it's seems to me that these 2 wires go to the distance sensor, but i don't understand why they go from there to the turn signal control unit.