[Is it me or are B12 throttles slow]

I have 98-06 written in the back of my manual??  they ain't cheap though, £25 for a throttle tube???

[Is it me or are B12 throttles slow]

Ive used R1 ones several times, But you need the right years... Ill have a look see if i wrote it down !!

[Is it me or are B12 throttles slow]

so you mean the twistgrip isn't opening the throttle fully?? move your hand round the grip a bit to open it more,, get a QA throttle, or make one of these..

 

 

[Yoke i.d please]

If it’s 54 mm it’s a 750, 1100’s are 56 mm

[Rair Air Dual Sock for B12... Which One?]

ive PM'd you a link as we ae not supoised to post eblag links

[Bandit alternators?]

Mk1 and mk2 1200’s are the same, 600 different 

['93 GSX600f engine swap]

Sounds ambitious,  I had a K4 1000 years ago and did some measuring up with a spare bandit frame, it was a bit of a night mare, cant remember which way but frame needded chopping and welding.......

so gave up, this is why many years later i stuck the big bore bandit motor in the teapot..much easier....

[GSF1200 Kent Cams - Anyone recommend?]

Used Kent cams a few times in Bandit engines, they work well,  they we’re exchange regrinds, ..

Never used adjustable sprockets on them with no I’ll effects.

Can’t remember exactly but I recall they were expensive, it used to be cheaper to get Dothead 750 cams but the6 are like rocking horse shite, none around for sensible money.

live also used Grumpy,s cams as well.

[Brian]

What happens when your not paying attention!!!!!!!!!!!!!!!!!!!!!

what a dipstick!!!!!!!!!!!!!!!!!

 

 

 

 

 

 

 

 

[Brian]

Now that was fun!!!

only stopped as engine mount came loose and it started vibrating like an old Triumph….

 

 

[Hyabusa box into Gsxr1100 or gsf1200]

firstly perhaps it would be prudent to read the rules at the top shipmate

 

 

[Gearbox giving be grief]

you can do the gearbox without stripping the top end, just whip the bottom off.

 

 

 

[Gearbox giving be grief]

new second hand  ones..

 

old ones.....

 

[Gearbox giving be grief]

The selector forks in the picture, they are shagged, worn, bent and have overheated..went in the bin

[Gearbox giving be grief]

lots of the part numbers are different for the gears unfortunately???

[Gearbox giving be grief]

https://oldskoolsuzuki.info/archives/category/the-vault/page/3

 

its all in Frankensteins guide.

 

I was going to read it all to let you know, but cant be arsed

 

 

this one was exactly what you described, jumping in and out of 2nd...

young kid moaning that it was supposed to be buillit proof, but broke..

Talked to his dad when i picked it up, he would start it every morning and immediately wheelie up the road stone cold!!!!!!!!!!!!!

 

 

[well that explains it.................]

4 hours ago, colinworth79 said:

I'm surprised something didn't jam up !  . If you need any bits drop me a pm I've got a  couple of motors in bits  .

 Cheers for the offer, shipmate, I’ll have it to bits after the Anglesey classic festival

[well that explains it.................]

22 hours ago, Dezza said:

A very good result (hear me out). If the nut or washer had got in somewhere and locked the back wheel at speed it could have all ended in tears or worse. But it didn't .

Yup hopefully they just plopped into the sump and are sat there

 

[well that explains it.................]

22 hours ago, clivegto said:

Not good. Ones I've seen have usually been punchy on the edge of the threads to stop the nut coming undone ?

Yup they usually are, just checked my other engines

[well that explains it.................]

This was one I put together from bits of 4 engines as a spare…. It ended up in my bandit as bandit motor was in teapot….

 

bottom end came from a power screen engine I bought for peanuts, can’t remember having alternator off, just looked in sump cleaned strainer and put it back together…..81mm barrels, set or second hand wiseco 1216 pistons with one set or rings missing, spare mr upperton  head Gsxr1100 cams, it went surprisingly well for a bitza!,

probably should have checked the alternator gear.

hopefully nuts and washer are in sump

[well that explains it.................]

Hopefully Clive…..

With luck the nut and washer plopped into the sump and didn’t get tangled up with anything else.

anyway swapping engines from teapot to bandit before Angelsey in 2 weeks….. I’ll look at it later.

[well that explains it.................]

pulling motor from bandit as it started rattling and feeling strange at Casle Coombe last week...

 

Fek my old boots!! that explains a lot

 

 

 

 

 

[Should this hole be blocked off?]

He’s right you know………

 

where does the hole go????

[GS750, Cam Chain Replacement.]

You have obviously missed the bit where you buy a manual and read it, if you don’t know whether you need to remove the cams, then you really need to read it………

1st thing to consider, endless or split link!

[Should this hole be blocked off?]

Ah, yours is. 750, mines 1100 didn’t realise.. 

I thought they were all the same, obviously not