Swiss Toni Posted April 4, 2018 Share Posted April 4, 2018 On the '85 750F model. The lower mounting hole (deeply recessed), that bolts to the lower engine plate. Is there a 'cushion' that fits into this hole? Can't make it out on the fische. Quote Link to comment
Simbec1863 Posted April 4, 2018 Share Posted April 4, 2018 There is on the H model Quote Link to comment
Simbec1863 Posted April 4, 2018 Share Posted April 4, 2018 (edited) It’s the same part no pics attached no 36 and 37 it’s a grommet with a metal spacer inside Edited April 4, 2018 by Simbec1863 Quote Link to comment
Swiss Toni Posted April 4, 2018 Author Share Posted April 4, 2018 Cheers, Si. I was looking at it on the phone. Can't enlarge pictures on there. Quote Link to comment
Macduff Posted April 4, 2018 Share Posted April 4, 2018 If its not clear from the parts diagram its a simple rubber bung that gets pushed in the hole in the belly pan so theres a rubber flange on each side with a small metal sleeve to stop it being crushed. Quote Link to comment
CockneyRick Posted April 5, 2018 Share Posted April 5, 2018 I got a spare set somewhere Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.