Downpipe link

[Sheep]

Guys,

In process of fabricating another set of downpipes for the EFE and I was wondering whether I should fit a link between #2 & #3 tubes while I am at it.If I am correct in thinking that a link helps the  balance of flow or something like that

I am thinking this time around I am going 4 into 2 with cans either side of the bike.

 

Edited November 21, 2018 by Sheep

[Gixer1460]

Doesn't do jack! Some have tried 'resonators' between 1&2 and 3&4 but more marketing tool than performance enhancement!

As 2 and 3 fire adjacent - you'd 'unbalance' flow from 1 and 4 for no gain.

[wraith]

More work for no gain.

you see a link pipe on standard 4-2 zorsts between the two single pipes after the four down pipes, wether it dose anything?

You will find, there will be some on here that say as you're making your own zorst you will only make the bike run badly  

I say if you can make your own zorst for your bike and it looks good and the bike runs, good on you and instead of spending £££ on a zorst just buy a sticker for £0.99 

[Sheep]

Ok that makes it easier then.One less bit to worry about.Cheers guys.