Stacks (rubber or otherwise) for BST-36 carbs

[scott-s]

 I did LOTS of searching and reading here and on the 'web today. I think  I want to try the RamAir MS-006 filters on my BST-36 carbs. The mouths of the carbs have a slightly oval shape. The rubber intake boots from my '00 air box won't quite fit. 

 It looks like the '89-97 GSX600F and GSX750F all used the same boots/stacks. There are 4 different part numbers, presumably because they're shaped slightly different to fit the inside of the air box.

 What other models used the BST-36 carbs? Would I benefit from getting, say, two sets of the inner boots? To keep them all the same length?

[scott-s]

 Also...I found that '97-00 Bandit 1200 and '91-93 GSX1100G manifolds fit the BST-36 carbs. Is it safe to assume that the rubber stacks for those models fit the BST-36 carbs?

 

If so, that opens up a lot of models for stacks:

 

https://www.ronayers.com/oemparts/partsearch/suzuki

[Foz]

Mk1 1200 bandit rubbers bolt straight on and hold the foam filters well. Mk2 1200 carbs are round so the airbox rubbers don’t fit on mk1 carbs very well 

[scott-s]

Mk1 is the '97-00 B1200?

[Rossco(Iceman Josros)]

1 hour ago, scott-s said:

Mk1 is the '97-00 B1200?

Yes

[clivegto]

You can also use silicon reducers.

[scott-s]

 I have a set of B12 stacks and clamps on the way, as well as some RamAir MS-006 filters. I'll let you know how it all fits.