clutch slave cylinders, are they all the same?

[VJ]

Im working on a gsxg project and Ive picked up another slave cylinder to fit of an oilboiler motor but cant remember what its off, all was going well but the seal is nackered in it and as I dont know what year it came off then I dont know what seal to order, are the sizes all the same if I just get any oilboiler one? The one Ive got came off a casing with lots of holes in and the slave itself says FLUID CLUTCH on it.

 

Cheers

John

[SiBag]

Have a look at the part numbers on alphasport website. That should give you an idea..

[wraith]

As far as I know there are two types on the oil cooled motor's one has (I think) a 32mm piston and the other has (I think as for both can't remember the exact size ) 40mm. Both seem to work OK, as I've used both sizes on Mrs W gsxr1100k and on my gsxf power kat.

I believe the bigger ones are off b12?

Edited November 27, 2017 by wraith

[wraith]

Ps , sounds like you have the gsxr1100 ghj 1052cc one.

[VJ]

Cheers guys, a quick eyeball with a ruler comes up at 38mm. I think im going to try to clean it up and see if that helps first but im expecting a torn seal as it was sat dry for god knows how long.

 

Cheers

John