Sumps

[davecara]

Wanting a flatter sump for my 1052, preferably with the oil cooler lines coming straight out the front. 

Whats the options?

[clivegto]

Flatter than a 1052 Dave ?  1127 has a lump in the middle b12 a lump to the left both front oiling but not flatter than the 1052.

[davecara]

Maybe flatter is the wrong wording, I want to tuck my exhaust up a bit closer to the sump and the banjos on the bottom of mine are stopping that with the exhaust I’m using.

I’ve just bought a new oil cooler set up that’s got lines for a front oiling sump.

hoping to kill 2 birds with one stone here and spend the cash I would use for banjo fittings on a sump and pick up

[Cheeky4648]

Would a 750f teapot 1993 -95 fit? They seem to have the deep area right in the middle and front exit oil lines. Don't know much about them swapping to other engines though. 

[davecara]

1 hour ago, Cheeky4648 said:

Would a 750f teapot 1993 -95 fit? They seem to have the deep area right in the middle and front exit oil lines. Don't know much about them swapping to other engines though. 

Yeah it should do so long as I have the correct pick up with it.

have you got one you want to part with? 

[clivegto]

@davecarathink ther are only 3 different dumps but not 100% sure on this, the slabby one  b12  & 1127 whch are fitted to a lot of different models.

Have discovered a 4th one today.

Edited November 22, 2017 by clivegto

[Cheeky4648]

6 hours ago, davecara said:

Yeah it should do so long as I have the correct pick up with it.

have you got one you want to part with? 

Just checked them out on dabay us. 83 85 look short and thin. Saw one with pick up for around $25. Only one I got is for my short stroke 750  endurance project. Sorry. 

Edited November 22, 2017 by Cheeky4648