Sander_Koop Posted September 18, 2017 Share Posted September 18, 2017 (edited) Hi all, Does anybody know if, and if so which years, of GSX-R 1100 stock 4-2 exhausts would fit my 1200 Inazuma? I currently have a 4-1 Laser system with a carbon can fitted, which sounds fantastic, but I really like the idea of twin pipes on a retro bike like the Inazuma. I'm thinking the oil cooled 1100's would be best? Then, the next question; anybody have a system they'd be willing to sell or swap for the 4-1 I have? see picture attached. I do think I'd probably have to lose my centre stand if I fit the twin pipes, which is a bit of a shame... Edited September 18, 2017 by Sander_Koop Quote Link to comment
Fatmama Posted September 20, 2017 Share Posted September 20, 2017 Any oil boiler gsxr twin system will fit. You need also the oilpan and a hanger for the left side zorst. Removing the main stand is a must. Carb settings will be funny as well... You got 32mm Kehins and the gsxr's have anything from 36 to 40 Mikunis. Gsxr twin systems you will find on many www sites. I thought similar to you, then started to like single zorsts more. Good luck and have fun. 1 Quote Link to comment
Sander_Koop Posted September 20, 2017 Author Share Posted September 20, 2017 8 hours ago, Fatmama said: Any oil boiler gsxr twin system will fit. You need also the oilpan and a hanger for the left side zorst. Removing the main stand is a must. Carb settings will be funny as well... You got 32mm Kehins and the gsxr's have anything from 36 to 40 Mikunis. Gsxr twin systems you will find on many www sites. I thought similar to you, then started to like single zorsts more. Good luck and have fun. Arse. Yes. Never thought about the carb setup... So the 1100 pipes won't clear the sump? That is ALSO a pain. Maybe this isn't as easy as I thought it would be... 1 Quote Link to comment
Captain Chaos Posted September 20, 2017 Share Posted September 20, 2017 (edited) I made a twin exhaust to fit on standard B12 headers (very similar to Inazuma headers, if not the same) on my EFE. Will post some pics this weekend when at home. Edited September 20, 2017 by Captain Chaos pic added 2 Quote Link to comment
Captain Chaos Posted September 23, 2017 Share Posted September 23, 2017 I could not find the pics which were supposed to be on the hard disc, but since the bike was on the bench anyway I took some new pics. Headers are B12, cans are GSX-R1100M, in between are some bits of tube my mate Saulius glued together for me. 1 Quote Link to comment
Captain Chaos Posted September 23, 2017 Share Posted September 23, 2017 during the fabrication process 2 Quote Link to comment
Sander_Koop Posted December 20, 2017 Author Share Posted December 20, 2017 (edited) Shit, I should really check on my own posts a bit more often. That looks well cool. Twin pipes suit the EFE. Edited December 20, 2017 by Sander_Koop Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.