Dukeman Posted August 5, 2017 Posted August 5, 2017 (edited) Clutch hub movement Just installed my clutch hub and after tighten the APE nut with the torque washer and lock washer there is quite a bit of movement.... is this normal? I have taken it on and off twice and cant see why? I dont think there should be moment. Took it all apart and the nut runs to the end of the thread..... used a rattle gun and moment? help? Edited August 5, 2017 by Dukeman Quote
Dukeman Posted August 5, 2017 Author Posted August 5, 2017 (edited) Worked out it is the clutch hub steel insert... need to use this bike is it bad? what is the best fix? Edited August 5, 2017 by Dukeman Quote
Gixer1460 Posted August 5, 2017 Posted August 5, 2017 Seen a couple with loose insert / center and other than sometimes a light 'knock' on clutch take up, didn't seem to have any effect! Quote
londonboards Posted August 5, 2017 Posted August 5, 2017 I thing I answered this on the GSR Forum but for the sake of others, if you have a steel insert in your clutch hub and it looks like this, then change it. It is totally goosed and will let you down big time very soon: https://youtu.be/Yj6vAyaUqN4 Greetings Quote
Sheep Posted August 6, 2017 Posted August 6, 2017 If I remember correctly I paid around £95 or thereabouts for a new one as my centre was loose too. Grumpy1260suzukispares.co.uk can get them or Robinsons. Better to be safe than sorry I guess Quote
Dukeman Posted August 22, 2017 Author Posted August 22, 2017 Ok have new centre hub, so all good. Is there any trick installing the anti snatch spring? I only have one spring and don't want to F#ck it up... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.