OldKat Posted June 2, 2017 Posted June 2, 2017 Gents. Fitting external camshaft oil feed pipes to a slingshot leaves you without the fairing fixing lug for the mid fairing panel fixing point. Has anyone engineered anything or have any ideas how to get around this? Thanks Quote
Upshotknothole Posted June 2, 2017 Posted June 2, 2017 Which top end oiler? The one I have has the bolt holes, though the bike is naked now. Quote
OldKat Posted June 3, 2017 Author Posted June 3, 2017 Hiya, thank you for the message. It's an HEL type.... which one are you using? Quote
Upshotknothole Posted June 3, 2017 Posted June 3, 2017 The Vortex one that APE sells in the states. Check around, you might be able to find a replacement bolt for each side that's drilled and tapped for the fairing bolt.http://gsxrzone.com/oil.html Quote
OldKat Posted June 3, 2017 Author Posted June 3, 2017 I will do, thanks buddy. Useful info! Appreciated. Quote
Jaydee Posted June 3, 2017 Posted June 3, 2017 (edited) I remember Stu at Warpspeedracing was doing some tasty billet top end oiling kits. Might be worth getting in touch with him. As you said you already have a kit and only need a fitting with a mounting hole for the mid-fairing. He may be able to run you one off or have something in stock. warpspeedracing.co.uk Edited June 3, 2017 by Jaydee Quote
OldKat Posted June 4, 2017 Author Posted June 4, 2017 Hi Jaydee, worth a shot! Thanks bud, appreciated! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.