wraith Posted February 19, 2017 Share Posted February 19, 2017 OK, this may of been asked before but cannot find anything, so sorry. What if any are the difference between the gsx750et frame and the gsx1100et frame? Swingarm spindle etc? Cheers Quote Link to comment
arnout Posted February 20, 2017 Share Posted February 20, 2017 Yeah.. I thought this was a well discussed subject, but couldn't find topics on it either.. Right.. Differences.. Frames are the same apart from the location of the front/bottom engine mounts (750 further back), and the swingarm spindle diameter (750 smaller). Quote Link to comment
buff Posted February 21, 2017 Share Posted February 21, 2017 Plus 750 doesn't have the brace bar across the front of the engine, if i remember rightly. Local dealership once told me the 1100 frame was made from thicker tubing, but it all looks he same thickness to me. Quote Link to comment
wraith Posted February 21, 2017 Author Share Posted February 21, 2017 Cheers Has the 750 a 17mm swing arm spindle or is that the 1100? Quote Link to comment
arnout Posted February 21, 2017 Share Posted February 21, 2017 6 hours ago, buff said: Plus 750 doesn't have the brace bar across the front of the engine.. Right..! Strange enough said cross tube is not depicted on the microfiches of the ET and EX 1100's.. Maybe the draftsmen at Suzuki just copied the 750 fiches for most stuff? 1 Quote Link to comment
arnout Posted February 21, 2017 Share Posted February 21, 2017 57 minutes ago, wraith said: Cheers Has the 750 a 17mm swing arm spindle or is that the 1100? Not sure.. From the back of my mind: 16mm for the 1100, 14mm 750..? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.