Guest Manxzookie Posted December 6, 2016 Posted December 6, 2016 I've got a bandit 12 in its got a new battery and it's still struggling to turn over any ideas ? Cheers stu Quote
fatblokeonbandit Posted December 6, 2016 Posted December 6, 2016 Whats the cranking voltage when you push the tit?? did it just suddenly start struggling to turn over or has it got progressively worse?? Quote
Guest Manxzookie Posted December 6, 2016 Posted December 6, 2016 yes just started doing this but I've had the head off also cam timing is spot on Quote
fatblokeonbandit Posted December 6, 2016 Posted December 6, 2016 Id check the cranking voltage first and the small earth cable that feeds the loom, it comes off the main battery earth just after it leaves the battery Quote
wraith Posted December 6, 2016 Posted December 6, 2016 If you have had the head off dose it turn over by hand with on spark plugs in freely??? Quote
Oldskool Posted December 8, 2016 Posted December 8, 2016 Iv had the same problem and it was the flywheel left hand side had come loose and was spinning on the end of the crank. Quote
Pheasantplucker Posted January 3, 2017 Posted January 3, 2017 did you sort the problem? was it a bad earth? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.