Swirl Posted December 5, 2016 Posted December 5, 2016 ok so what performance mods can you do to a gsx1100g, its got a lightweight 4-2-1 stainless on, I got given a 750 gsxr engine yesterday with a goosed gearbox but a dot head will that go on ? Quote
Oilyspanner Posted December 6, 2016 Posted December 6, 2016 Rare bike Swirl, I don't know anyone who spiced one up, but : The 1100G had soft cams, the softest of the 1127 engines, so the dot cams would add to the second half of the rev range. I couldn't remember what c.ratio they had so looked it up, they had 10:1, so the dot head will add some more compression - which is always good ! I suppose the dot head might make the carbs close to frame/tank, it can on some bikes. you've got 2 lots of cam sprockets, so in any event you'll be okay whatever the cam chain. Here's the link to the spec I looked up, nice article from Bike magazine at the bottom - I didn't know the 1100G had a balance shaft either. http://www.motorcyclespecs.co.za/model/suzu/suzuki_gsx1100g 91.htm Quote
Swirl Posted December 6, 2016 Author Posted December 6, 2016 nice right up, it was a rare bike, its in bits now, doner for a trike, thinking of keeping the frame and having a sling style tank made for it with modern running gear and possibly a turbo, but that is way back in the queue Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.