busa ash Posted November 21, 2016 Share Posted November 21, 2016 can some one who has one in bits tell me the size of the bolt thats on the oil cooler pipe bottom of the front of engine Quote Link to comment
busa ash Posted November 21, 2016 Author Share Posted November 21, 2016 the two bolts that bolt into the oilcooler pipes into the front of the engine Quote Link to comment
Arttu Posted November 21, 2016 Share Posted November 21, 2016 From top of my head I would say M14x1.5 but I'm not 100% sure... I can check later if needed. 1 Quote Link to comment
busa ash Posted November 21, 2016 Author Share Posted November 21, 2016 1 hour ago, Arttu said: From top of my head I would say M14x1.5 but I'm not 100% sure... I can check later if needed. if you could please arttu (my motor still has oil in and cooler attached ) Quote Link to comment
Arttu Posted November 21, 2016 Share Posted November 21, 2016 3 hours ago, busa ash said: if you could please arttu (my motor still has oil in and cooler attached ) Me and my big mouth... It was a bit harder than I anticipated as spare engine buried under the work desk was there wrong way around. It's quite heavy lump even if some heavy parts are missing. Any ways, yes, it's M14x1.5. 2 Quote Link to comment
skelly Posted November 21, 2016 Share Posted November 21, 2016 M14 x 1.5. Deffo 100% sure cus I just did mine. Skel.. 1 Quote Link to comment
busa ash Posted November 21, 2016 Author Share Posted November 21, 2016 thanks arrtu and skelly 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.