efe gsx1135 bolt size in bottom of engine oilcooler

[busa ash]

can some one who has one in bits tell me the size of the bolt thats on the oil cooler pipe bottom of the front of engine 

[busa ash]

the two bolts that bolt into the oilcooler pipes into the front of the engine 

[Arttu]

From top of my head I would say M14x1.5 but I'm not 100% sure... I can check later if needed.

[busa ash]

1 hour ago, Arttu said:

From top of my head I would say M14x1.5 but I'm not 100% sure... I can check later if needed.

if you could please arttu (my motor still has oil in and cooler attached )

[Arttu]

3 hours ago, busa ash said:

if you could please arttu (my motor still has oil in and cooler attached )

Me and my big mouth... It was a bit harder than I anticipated as spare engine buried under the work desk was there wrong way around. It's quite heavy lump even if some heavy parts are missing.

Any ways, yes, it's M14x1.5.

[skelly]

M14 x 1.5.

Deffo 100% sure cus I just did mine.

Skel..

[busa ash]

thanks arrtu and skelly