luke2152 Posted June 23, 2016 Share Posted June 23, 2016 Having brought a k3 b12 as a project (in an only half complete state) I seem to be about 5mm short on the spacers for the rear wheel. Not sure what one I'm missing. Perhaps one that goes between the caliper hanger and the swingarm? Anyway heres some pics. Quote Link to comment
vizman Posted June 23, 2016 Share Posted June 23, 2016 have you tried tightening up the rear wheel spindle/nut? Quote Link to comment
luke2152 Posted June 23, 2016 Author Share Posted June 23, 2016 No it looked like it would squeeze the Swingarm further than I'm comfortable with unless that really is just the norm Quote Link to comment
fatblokeonbandit Posted June 23, 2016 Share Posted June 23, 2016 There are 2 stele plates missing that should be bolted into the inside edge of the swinging arm the protect the ally of the arm when its all tightened up 1 Quote Link to comment
vizman Posted June 23, 2016 Share Posted June 23, 2016 ....2 big penny washers....job done Quote Link to comment
fatblokeonbandit Posted June 23, 2016 Share Posted June 23, 2016 item 26............61124-17E10 £5.47 each from robinsons Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.