VJ Posted May 4, 2016 Share Posted May 4, 2016 Ive managed to get my hands on a cheap oil temp sensor and a gauge thats the perfect size for a hole in my fairing so I thought I may as well plumb it in. The sensor has an m10 thread and is fairly long but i dont mind sorting out an adaptor if necessary. I know the turbo guys like to use the oil galley plug on the right hand side underneath the ignition pickup, but whilst I was having a look down there I noticed a bolt going vertically just to the rear of the galley plug, seems to have a sealing washer on and from a quick glance may be m10 if im lucky. Is this something I could use to put the temperature sensor in or is there a better option? Cheers VJ Quote Link to comment
fatblokeonbandit Posted May 4, 2016 Share Posted May 4, 2016 I use the sump plug on me harris. works a treat Quote Link to comment
VJ Posted May 4, 2016 Author Share Posted May 4, 2016 hmm i was hoping for somewhere I could just fit it in nice and tight and forget about it rather than have to move it every oil change Quote Link to comment
Jaydee Posted May 4, 2016 Share Posted May 4, 2016 What about using the spare feed on the left hand side of the sump? Nice and discreet. Quote Link to comment
tabby59 Posted May 4, 2016 Share Posted May 4, 2016 I think the frame rail will be in the way with the one you are pointing at. I put mine in the one on the left front, on my 750. Quote Link to comment
VJ Posted May 6, 2016 Author Share Posted May 6, 2016 (edited) On 04/05/2016 at 6:58 PM, vizman said: are you a mental? Well yes, is it not mandatory anymore? Jaydee, that looks like a suitable spot, I'll have a look into it, cheers Edited May 6, 2016 by VJ 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.