750wn rear spindle length

[spiderpig]

Could anyone do me a massive favour and measure their 750wn rear wheel spindle length. 

 

I've the arm gone into my 7/12 and trying to work out spacers for the b12 wheel, not sure what spindle I have in and if it's long enough. 

 

Cheers 

[Upshotknothole]

I'll try and get out to my garage today and I should have a bare one I can pull and measure. Just need the axle length?

[spiderpig]

Yep, if you could that would be great  cheers 

[Upshotknothole]

First is from the outside edge, second is just the spindle from the inside of the flat end. 

[Upshotknothole]

Let me know if you need anything else. I left the axle on my work bench, need to swap that swing arm in this week so I can take measurements of anything else ya might need while it's out and bare.

[spiderpig]

Brilliant, cheers man 

[spiderpig]

On 2/23/2025 at 8:49 PM, Upshotknothole said:

Let me know if you need anything else. I left the axle on my work bench, need to swap that swing arm in this week so I can take measurements of anything else ya might need while it's out and bare.

Thanks for that 

 

Turns out I do have the right spindle annnnd the right spacers