speedjunkiesgr Posted September 17 Posted September 17 I would like to keep the Katana iconic instruments on a Oilcooled engine swap? Will they work? Anyone done it? Quote
Gixer1460 Posted September 18 Posted September 18 As the tach is electronic it should be possible. If you are keeping the original running gear ie. wheels then the speedo will work and read correctly - if changing those then readings will be wrong! Quote
speedjunkiesgr Posted September 24 Author Posted September 24 On 9/18/2024 at 11:45 AM, Gixer1460 said: As the tach is electronic it should be possible. If you are keeping the original running gear ie. wheels then the speedo will work and read correctly - if changing those then readings will be wrong! Thank you.. going with 17 inch wheels so no correct ones Quote
eightball_hotrod Posted September 27 Posted September 27 did that on mine gsxr 1100 drive and speedo cable on kat instruments the reading is not that far away around 5 ish kmh the rev counter otherwise resist to work properly.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.