AIDZUKI Posted February 11, 2016 Posted February 11, 2016 Im on building a gsxr 750 slabby with B12 mk1 motor in it. Now im a fuckwit when it comes to most things but especially electrickery Im getting a live up to the connection to the coils but sweet FA at the plug .Ive tried three different coils so dont think its down to them . Could it be down to the ECU or ignition sending wrong or no pulse.If so how would i check for this ,would be easy if i had a spare ECU Cheers Aidy Quote
davecara Posted February 11, 2016 Posted February 11, 2016 Are you using the bandit cdi or the slabby? Quote
AIDZUKI Posted February 11, 2016 Author Posted February 11, 2016 All bandit electrics except for axwell coils Quote
Captain Chaos Posted February 12, 2016 Posted February 12, 2016 ignition lock also B12? It should have a resistor in it. Quote
AIDZUKI Posted February 12, 2016 Author Posted February 12, 2016 Came with harness so I believe so Quote
crainer Posted February 16, 2016 Posted February 16, 2016 I have exactly the same project and problem. Just ain't getting a spark. Could be cdi unit. 1 Quote
AIDZUKI Posted February 18, 2016 Author Posted February 18, 2016 Yes i think thats what could be wrong . Quote
crainer Posted February 27, 2016 Posted February 27, 2016 Sorted mine. Break in wire that gives the coil a live feed from starter switch. Could be worth a look at your loom. 1 Quote
AIDZUKI Posted February 28, 2016 Author Posted February 28, 2016 cheers m8 will give it a try thanks Quote
AIDZUKI Posted March 6, 2016 Author Posted March 6, 2016 Tried that check out feeds from ecu to coils with buzzer on tester .Black from ecu to coils ok White from ecu to coils ok ,Orange and white from starter switch to coils ok . Looks like ecu,s fooked Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.