Cobby Posted January 20, 2016 Posted January 20, 2016 What are the standard factory fitted carbs Is there a better option to use If using the standard carbs what filters are best to use Ta Quote
Peterrr Posted January 20, 2016 Posted January 20, 2016 32mm Mikuni carburators I had a stage 3 dyno on it with 4 individual K&N filterpods. It runs pretty good with that Quote
Cobby Posted January 21, 2016 Author Posted January 21, 2016 (edited) If the inlets are 52 mm do I need a filter with a 52 mm outlet? I know this seems like an obvious question to some but where does the 32mm come into it? Edited January 21, 2016 by Cobby Quote
steve.w Posted January 21, 2016 Posted January 21, 2016 1 hour ago, Cobby said: If the inlets are 32 mm do I need a 32mm filter? I know this seems like an obvious question but the nearest size ramair do is a 34mm its the back of carbs you need to measure Quote
Peterrr Posted January 22, 2016 Posted January 22, 2016 (edited) You can use K&N filterpods, number RC-0984 Edited January 22, 2016 by Peterrr Quote
hussey1 Posted January 24, 2016 Posted January 24, 2016 I had the individual K&N pods on mine too, I never managed to get it to the Dyno but it was running well as previous owner had set it up and jetted carbs for the filters... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.